LIST Version 7.6                VERSION HISTORY                         8/13/91

  7.6a,   8/13/91 - Public release

  7.547,  8/07/91 - Plus: correct a-D not writing current screen if no lines
                    marked or highlighted
          8/02/91 - Plus: Correct video mode set upon exiting for a-x and x

  7.546,  7/25/91 - Plus: remove sending formfeed for ctrl-P
                  - Reinstate distribution of LISTS and LISTR files

  7.545,  7/24/91 - Plus: change to exit when no files when using a mouse
                  - Plus: disallow getting new files when viewing a piped file
                  - Plus: correct loop with Help and empty directory

  7.543,  7/21/91 - Plus: revise memory allocation. Minimum memory required
                    is now 74k. This yeilds 250 directory entries, a maximum
                    file size limit of 4mb and no screen saving (alt-X).
                    With 100k, the maximum of 1000 directory entries and a
                    maximum file size limit of 16mb.

  7.5i2,  7/18/91 - Plus: correct sort with no entries and non-filename key

  7.539,  7/08/91 - Plus: improve ctrl-v with single files
  7.538,  6/28/91 - Plus: correct loop in alt-I using different directories
          7/05/91 - Plus: exclude directories from -F sort
  7.536,  6/13/91 - Plus: improve video mode reset for exiting
                  - Improve ctrl-right positioning to end of longest line
  7.535,  6/08/91 - Plus: make continuous scrolling faster, 1000 lpm maximum
                  - Plus: correct disk free space check when replacing file
  7.534,  6/14/91 - Plus: correct Invoke requiring something in Options:
                  - Disable alt-G DOS shell for piped files
          5/27/91 - Plus: a-v, leave on line overlap for PgUp/PgDn
          5/29/91 - Plus: correct file selection of files without extensions
                  - fix beeper lockout
          6/01/91 - Plus: if empty directory, disallow all commands except
                    exits, Filemask, and Path.
          6/03/91 - Plus: change dialer to accept only space (32) through @ (40) and 0 thru 9

LIST Version 7.6                VERSION HISTORY                         8/13/91


  7.5i,   5/23/91 - Regular: Correct memory allocation error with UV

  7.533,  5/21/91 - Plus: correct /B with 3-up file display
                  - Correct loop with up and left arrows (and mouse) when
                    the directory is empty
                  - Plus: correct viewing of ARJ files; change E to P
                  - Plus: allow byte sizes up to 640 Gb  (was 640 Mb)

  7.5h,   5/16/91 - public release

  7.532,  5/11/91 - Plus: changed ctrl-P (print file) to add formfeed at end
  7.531,  5/07/91 - Plus: fix ARJ extract parameter
                  - correct detection of negative command line switches,
                    e.g. /-W or /W- are both valid now
  7.530,  5/03/91 - Plus: correct alt-A returning to menu
  7.529,  4/29/91 - Plus: remove trailing blanks from filespec (Sun glitch)
                  - Plus: allow ESC to cancel a-v Sort
  7.528,  4/26/91 - Plus: correct a-v Filemask command not allowing editing
                    of current mask
  7.527,  4/19/91 - Plus: add '-' option for descending a-v sort
          4/23/91 - Correct inability to clone alt-s file sharing
          4/24/91 - Correct loop with mouse (/M) and empty disk (no files)
  7.526,  4/10/91 - Plus: correct a-v after a-i changing directory
                  - Make O (Eurodate) clonable
                  - Plus: close input file for Copy if respond N to
                    over-write warning
                  - Plus: check for sufficient disk space before copy/move
          4/13/91 - Plus: remove sending of '1' in dialer
  7.525,  4/02/91 - Correct /F and /T using one less character
                  - Plus: make more memory available for FV and ARCE
                  - Plus: add <escape> from Invoke Options: prompt to cancel
                  - Correct right-arrow with marked lines showing garbage
  7.524,  3/28/91 - Plus: Correct command line processing of x:nnn parameters
  7.523,  3/25/91 - Plus: correct a-v copy overwrite message showing
                    origin instead of destination file name
          3/26/91 - Correct blink/hi-intensity logic
  7.522,  3/16/91 - Plus: make Continuous scrolling cpu speed independent
          3/21/91 - Revised memory allocation: turning off screen saving
                    with alt-n (and then cloning) results in a smaller
                    memory requirement, about 64k for LIST Plus.

  7.521,  3/08/91 - Plus: change F2 to F3 to toggle line 25 message
          3/14/91 - Plus: correct ESC from alt-W changing color to normal2
                  - Plus: correct alt-B if in bottom window
          3/15/91 - Plus: correct speed locate for sort orders not by filename
                  - Correct command line color change after find/scan

  7.5g,   3/11/91 - Version 7.5g released to registered and licensed users

  7.520,  3/05/91 - add /4 command line switch to enter in 43/50 line mode
                  - Plus: improve dialer, add '1' for LD calls
          3/06/91 - Plus: correct cursor positioning when moving to parent
                    directory which is on the second or later screen
  7.519,  2/21/91 - correct handling of APXcore flag (ignore DV checks)
                  - Plus: correct ViewArc failing after ESCape to Alt-I
                  - Allow use of hi-intensity background via LISTOPT only
          2/26/91 - improve * filter to handle 8D-8A sequence and backspace
  7.518,  2/20/91 - all DEBUG offset and information have been replaced byt
                    the LISTOPT customization program
          2/19/91 - correct alt-B not highlighting last line plus one of file
                  - correct saving and restoring of EGA/VGA blink status
  7.517,  2/06/91 - Correct a-D/a-O not marked lines span 64k boundary
  7.516,  1/29/91 - Plus: add PAK and SDN format to Viewarc and alt-I functions
                  - Correct address exception with F9 ScanBack
                  - Plus: check target filenames for invalid characters
                  - Add /L-, S-, W-, J-, M- command line parameter
                  - Correct Q from a-v not displaying file last viewed
  7.515, 1/08/91 - Plus: correct file selection menu with /D and no d:\path
                 - Plus: add shift-letter to jump to filename starting with
                   with that letter in the a-v directory display
         1/06/91 - Correct display duplication after ctrl-F
                 - correct alt-I for sfx files and with fixed length files
                 - Plus: correct a-v loop with empty disk
  7.514,12/02/90 - add /Q and a-Q to toggle beeps
                 - change beeper to beep twice at the same frequency
                   regardless of cpu speed; tone specified by LOUDNES
                 - change dialer ctrl-T to position cursor on found line
                 - change cursor to large size for all cursor positioning
                 - add /V and use of DOS VERIFY setting to verify files
                   copied
  7.513,11/14/90 - improve color used for tagged files
                 - correct display of toggles on command line
                 - correct /S terminating command line processing
                 - change Help to accept any key as <enter> except <escape>
                 - correct c-K not showing numbers when scrolled right
                 - change scroll interval for hexdump mode to line up with ruler
                 - Plus: add \ as change path command
        11/25/90 - Plus: correct a-x, should exit in original directory
        11/26/90 - Correct display of Help screens with /B option
                 - Correct position of "New file" message with split screen
                 - Add /D command line option to go directly to file
                   selection (unfinished)
        11/27/90 - Plus: if the last record number is unknown, display the
                   percentage of the file read so far
        11/30/90 - Correct duplicate display if a-d or a-o used with no
                   lines marked or found

  7.5f, 10/26/90 - released to registered users
                 - correct a-v directory sort not in filename order
  7.510,10/16/90 - correct display of datestamp with piped files
                 - correct Find/Scan failing with large piped files
                 - added /B command line parameter to force LIST to use BIOS
                   instead of direct screen writing for displaying files
  7.509,10/15/90 - issue "Program not found" message if FV or ARCE/PKUNZIP are
                   not found for the a-v V command used with the a-I command
  7.508,10/13/90 - increase continuous scroll increment to 8 from 1
                 - correct ctrl-right acting like ctrl-B
                 - Plus: exclude directory names from a-v sort
  7.507,10/09/90 - add O command to toggle date format from US mm/dd/yy
                   format to European dd-mm-yy format which is clonable
        10/05/90 - Plus: ignore Q from a-v if last viewed file has been deleted
        10/04/90 - help screen corrections
                 - correct /F parameter
                 - add /T parameter to search for case sensitive text

  7.5e,  9/27/90 - Plus: add Z command to toggle a-v menu line 25
         9/25/90 - Plus: improve dialing command, correct dialing message
                 - change cursor positioning on help screens

  7.5d   9/20/90 - Plus: add message "No file(s) found" to file selection
                   screen if disk/directory has no files. You may use commands
                   like Path at this point, but commands like Copy/Delete/etc
                   have no meaning.
         9/19/90 - Plus: correct "No files found" after deleting a subdirectory
         9/18/90 - correct Find with mixed case search text
                 - Plus: correct inability to clone a-v sort None option
                 - Plus: correct dialing message (junk on right side)
                 - Plus: reset RTS when disconnecting modem

  7.5c,  9/12/90 - correct loop in Find/Scan when using '&?' in search text
                 - add command line /E parameter to begin display at eof

  7.5b,  9/03/90 - Plus: correct loop when empty directory

  7.5a,  8/30/90 - public release

  7.4e,  8/28/90 - correct mouse looping at top of file
                 - changed /F to use Find instead of Scan
                 - make cursor visible when /M mouse option used
  7.4d,  8/25/90 - correct Scan/Find for search text at end of records
         8/22/90 - don't clear screen for alt-G
                 - change a-v Edit to exclude prompt for options and return
                 - leave cursor visible when mouse is enabled

  7.4a,  8/07/90 - correct search loop if enter commands too fast
                 - correct highlighting of line before top line when text is not found

  7.427, 7/31/90 - more corrections to new Find
                 - change Alt-Y to recall bookmarks in LIFO order
  7.426, 7/28/90 - correct Tab filter for tab at end of file
                 - correct inability to interrupt Scan/Find
  7.425, 7/27/90 - correct new Find not finding string at end of line
  7.424, 7/25/90 - add 0Ch (formfeed) like line feed to filters
  7.423, 7/18/90 - correct incorrect highlighting of found text with Find
                 - correct alt-A switching to Find if Scan used
  7.422, 7/01/90 - correct auto adjustment of a-v up for small windows
                 - Plus: expand a-y and c-y to hold ten bookmarks
  7.421, 6/24/90 - minor Help screen changes
                 - Plus: added "Reading directories ..." message
         6/28/90 - Plus: clean up a-v displays with split screen
  7.420, 6/22/90 - optimize allocation of internal tables to allowing viewing
                   even when there's not enough memory; a-x and a-g are
                   disabled first to try for enough memory; then, the
                   maximum file size viewable is decreased until there is
                   enough memory; approximately 1K is required for each 1mb
                   of file size, the current limit is 16mb, but can be
                   increased to 400mb or more; a DEBUG patch for the file
                   size limit will be supplied later, or just included
                   in the ADN setup program.
  7.419, 6/21/90 - correct display of blank lines with fixed length recs
                 - change ctrl-right to scroll full right
                 - change a-g to clear screen
  7.418, 6/14/90 - correct loop with zero byte files
  7.417, 6/13/90 - correct fast filter for fixed length records which
                   have no CR at the end
  7.416, 6/12/90 - add second hex dump format for fixed length records
                 - try to correct EOF problems with /R#
  7.415, 6/09/90 - correct display of files sizes with 1-up
  7.414, 6/06/90 - correct divide overflow on a-v menu
                 - correct ruler display with split screen
                 - add second ruler format for hex dump display
  7.413, 6/05/90 - correct display of file sizes over 32mb
                 - correct inputting of numbers over 64k
  7.412, 6/03/90 - correct a-v delete/move failing because file was
                   opened for share
                 - correct setback attr changing bright color
                 - replace a-v A and K with ^T and ^U
                 - change tagging color to be reverse of normal color
                 - correct EOF code, garbage character at offset '127' in file
                 - change alt-D and alt-O to write the "found" line from
                   Scan/Find when no lines are marked
                 - correct reading keyboard while loading file
                 - correct file size displays for sizes over 32mb, up to 999mb
  7.411, 6/02/90 - fix "Access denied" message on non-EGA systems when
                   supplying only d:\path (no filespec) on the command line
                 - add switching of smode list via 0; from the a-e prompt,
                   enter 0 to switch from A)head to P)aradise codes
                 - correct loop using fixed length records, /Rnnnn
                 - increase maximum logical record size from 910 to 2048
                 - work on EOF garbage displays and hex dump extra last char

  7.410, 6/01/90 - work on EOF garbage displays
                 - the various flavors are:
                        LS - small version, runs in 30k, no a-g, no a-x
                        LR - regular version
                        LP - plus version, has a-v file selection menu

  7.49,  5/31/90 - add '/#nnnnnn' command line parameter to begin viewing at
                   record number 'nnnnnn' (plus and enhanced only)

  7.48,  5/30/90 - add / from AV menu to toggle disk space message
                 - tweak AltW routines; correct split screen problems
                   when changing video modes
                 - change printing to use LPT1
                 - add / from AV menu to toggle disk space message
                 - change printing to use LPT1 instead of stdout

  7.47,  5/10/90 - add support for video modes 22h, 23h, 24h (132 lines)
                   If the screen becomes unreadable, e.g. the mode enters
                   a graphics mode for your display adapter, press Alt-E
                   and then a 1 to reset the display.
  7.46,  5/09/90 - add user screen mode selection via alt-E
                 - add support for UltraVision, VGA, other screen modes
  7.45,  5/08/90 - speed up Find
                 - correct search for & and ?
                 - fixed tagged deleted deleting file at bar
                 - fix alt-A always invoking Find
                 - fix message, attempt to delete an open file says 'Disk full'
                   instead of access denied
                 - restore cursor shape after invoking a program
                 - add filename to "Overwrite?" prompt
                 - add copying of tagged files
  7.44,  3/15/90 - add support for DV to return cycles waiting for console
  7.42,  3/02/90 - add Wrap to fast filter
                 - change Wrap and alt-J and 7/8/* to stay near position
                 - add F (filemask) command to a-v
                 - add Tag, Untag, AllTag, KlearTag commands
                 - change Delete to process tagged files
  7.41,  2/23/90 - correct error handling in a-v after unknown key
                 - set d:\path from LIST string for FE
                 - add None sort option to a-v
                 - check for existing file in a-v Move/Copy
  7.40,  2/16/90 - correct file selection with 6-up display
                 - use filename as secondary sort key

  7.3e,  2/03/90 - fix invisible cursor with mouse after alt-g
         2/04/90 - move editor name to clonable area
                 - add I invoke program command to a-v menu
         2/06/90 - retain FV display after a-i
         2/08/90 - correct alt-i with mouse
                 - restore correct crt mode upon exit instead of BW80
         2/11/90 - correct READING loop in Q from a-v menu
  7.3d,  2/02/90 - fix path loop, add Edit option to a-v
  7.3a2, 2/01/90 - fix C continuous scroll not working

  7.3a,  1/31/90 - version 7.3 released
  7.36,  1/30/90 - add second help page for plus version
                 - add ctrl-right as restart with first file like 1
  7.35,  1/26/90 - correct memory allocation if only enough for one
                   file buffer
                 - correct a-v ESCape returning to root directory
  7.34,  1/25/90 - fix a-v Path loop with "d:\" syntax
                 - improve ctrl-v switching of windows
                 - add 1 command to restart displaying with first file
  7.33,  1/25/90 - correct various file selection filename/path bugs
  7.32,  1/23/90 - decrease minimum file buffers requirement back to one
                 - correct Review missing d:\path from a-v selection
  7.31, 12/29/89 - add LIST environment variable for Viewarc
         1/17/90 - set original datestamp for move and copy
         1/19/90 - disable auto-scroll after Find with Wrap on
                 - add /K on command line option to disable mouse
                 - correct bug in FastScan not finding data at end of
                   line
                 - correct Reading loop after toggling alt-S shared flag
                 - increase modem init string from 20 to 30 characters
  7.30, 12/07/89 - fuss with mouse sensitivity and cursor lines
                   change alt-Y to recall bookmark line
                   add ctrl-Y to set bookmark line

  7.2a, 11/26/89 - version 7.2a released
  7.23, 11/25/89 - correction for files with CR but no LF
                 - correct Ctrl-I with TAB interval of 0
  7.22, 11/24/89 - correct AltI not changing the drive
                 - correct X command
  7.21, 11/22/89 - change old X command to exit in original subdir for
                   plus version
                 - correct selection of subdirs with extensions
                 - correct a-v Copy to allow copying with a different
                   filename to the same directory
                 - add display of file attributes to 1-up
  7.20, 11/11/89 - correct return to route if cmdline file not found
                 - refresh a-v display after delete or move
                 - correct a-v display of garbage if delete last file
                 - restore command line switches in small version
                 - add X command to a-v to exit in original subdir
                 - make /M mouse option clonable
                 - correct mouse horizontal sensitivity
                 - change /F to use Find instead of Scan
                 - change a-v Viewarc a-i to default to .ARC
                 - change a-v Viewarc a-i to treat COM and EXE as LHARC
                 - restrict Help display to current window dimensions
                 - correct fast filter for lack of LF after CR
                 - add F10 like ESC to exit from a-v menu
  7.1a, 10.28.89 - version 7.1 released

  7.15, 10/26/89 - correct new filter EOF problem
                 - correct Q from a-v menu when no files have been viewed
  7.14, 10/25/89 - improve filter speed if no options (alt-J,*,etc) set
                 - change filter defaults to none
  7.13, 10/23/89 - change Ctrl-I to be TAB interval command
                 - change Q in a-v to return to viewing of last file
                 - add Alt-X in a-v as exit with original screen
                 - correct c-end in a-v
                 - change F2/F4 to change found line attributes if present
                 - allow cloning of second window color in normal version
                 - add LZH to ViewArc/a-i
  7.12, 10/21/89 - allow 11 character subdirectory names, 5 or less up
                 - change default a-v display to 5-up
                 - correct a-v sort by date/time
  7.11, 10/20/89 - allow d:\path command line syntax
                 - change a-v down arrow to wrap to first entry after
                   last one
  7.10, 10/15/89 - correct highlighting of found text
        10/16/89 - correct a-v selection of root directory
                 - correct inability to clone text colors in
                   regular version
        10/18/89 - fix c-PgUp in regular version
                 - move code so offsets line up for DEBUG in manual
                 - correct cloning of second window color
                 - add ctrl-J to redefine TAB interval

  7.0a, 10/15/89 - version 7 initial release
